***Do not install Survivor Sportfloor over expansion joints or in areas where the product will be exposed to animal fats/greases or vegetable oils.ģ.

The surface must be free of solvents, paint, grease, oil, wax, alkali, sealing/curing compounds, and any other foreign material, which could affect adhesive bonding. Dust, scale, and loose particles must be removed.Ģ. All subfloors must be clean, smooth, dry, and flat within 1/8” in 10 feet. Survivor Sportfloor is not recommended for exterior use, exposure to excessive UV rays can result in fading and/or color variation, but if that does not bother you, it will still last a long time.ġ. In rooms that are exposed to intense or direct sunlight, the product must be protected during the conditioning, installation and adhesive curing periods, by covering the light source.ģ. Room temperature must be maintained between 65 and 75F (18 and 24C) and relative humidity at 50%.Ģ. Survivor Rubber and Sportfloor and adhesives must be site conditioned at room temperature for 72 hours prior to, during, and after the installation. Survivor Sportfloor Systems Installation Instructionsġ00lb Roller, Tape Measure, Straightedge, Square, Utility knife, 1/2” Drill Motor, Jiffy Paddle, 1/16' Trowel, Chalk Line and Paint Rollerġ. These predesigned blends project an understated, diverse look. When a small amount of color (20%) is all that’s needed for a fitness area, Cross Training is the right choice.

Floor Preparation & Maintenance Products.

Survivor the quest rubber mat